Applications

GadCap Technical Solutions will be very glad to welcome you at the ASME TURBOEXPO 2026 that will be held from the 15th to 19th of June 2026 at the ALLIANZ MiCo in Milan, Italy.

Come and visit us at booth D40.

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.
Do not hesitate to contact us if you wish to obtain a visitor pass or if you want to discuss your projects with us.

GadCap Technical Solutions will be very glad to welcome you at the ASME TURBOEXPO 2025 that will be held from June 16th to 20th at the Renasant Convention Center, Memphis, Tennessee.

Come and visit us at booth 617.

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.
Do not hesitate to contact us if you wish to obtain a visitor pass or if you want to discuss your projects with us.

GadCap Technical Solutions will be very glad to welcome you at the 16th EUROTURBO Conference that will be held from March 24th to 28th at the New Campus for Mechanical Engineering of Gottfried Wilhelm Leibniz Universität in  Hannover.

Come and visit our booth.

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.
Do not hesitate to contact us if you wish to obtain a visitor pass or if you want to discuss your projects with us.

GadCap Technical Solutions will be very glad to welcome you at the Aerospace Test and Development Show 2024 that will be held on the 10th and 11th of September 2024, at the MEETT, hall 7, in Toulouse, France.

Come and visit us at booth #805.

More information about the show at https://www.aerotestdevelopmentshow.com/

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.

5 Years!

It’s hard to believe that it has been 5 years since the management buy-out that created GadCap Technical Solutions Ltd. Thank you to all of our supporters who have worked with us during that time. A special recognition goes to Shard Credit Partners, Ryecroft Glenton and Weightmans who have guided us from day one to make this a success.

To all customers and suppliers – we must also thank you for your continued support – many of whom we have been working with for over 20 years (prior to us being GadCap). Looking forward to many more.

GadCap Technical Solutions will be very glad to welcome you at ASME Turbo Expo 2024 that will be held from June 24th to 28th at ExCeL London, London, England, United Kingdom.

Come and visit us at booth #507.

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.
Do not hesitate to contact us if you wish to obtain a visitor pass or if you want to discuss your projects with us.

 

GadCap Technical Solutions will be very glad to welcome you at ASME Turbo Expo 2023 that will be held from June 26th to 30th at Hynes Convention Center, Boston, MA, USA.

Come and visit us at booth #519.

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.
Do not hesitate to contact us if you wish to obtain a visitor pass or if you want to discuss your projects with us.

GadCap Technical Solutions will be very glad to welcome you at the EUROTURBO Conference that will be held from April 24th to 28th at Danubius Hotel Helia in Budapest, Hungary.

Come and visit our booth.

During the Exhibition we will have the pleasure to present you our solutions and services for turbomachinery monitoring.
Do not hesitate to contact us if you wish to obtain a visitor pass or if you want to discuss your projects with us.

Turbo Expo 2022

MEET US!
Finally, live ASME Turbo Expo is coming back next week!

We will be exhibiting at the ASME Turbo Expo at the Rotterdam Ahoy Convention Centre, in Rotterdam, The Netherlands on the 14th – 16th of June 2022.

Come and visit us at both #513.

#paybacks-at-the-tip

April 2022 is the 20^th Anniversary of Laser welded high temperature CapaciSense probes for gas turbine blade health monitoring.

The challenge back in 2002 was to create robust sensors that connected to the in house manufactured triaxial mineral insulated cable.  The inner, central guard and outer sheath of the cable required electrical connection to the sensor.  At the same time, the three elements needed to be insulated electrically from each other using materials which could withstand over 1000°C.  Since 1996 this had been achieved using manual TIG welding, but a more reliable and repeatable method was required.

Laser beam welding was selected as the primary assembly technology as it was a proven technology which provided a reduced heat affected zone with enhanced resistance to vibration loads giving accurate and repeatable results.  The technique had already been used for low temperature applications involving mainly spot welds or resistance temperature devices with a maximum of two seam welds, but the challenge was to apply this to the high temperature CapaciSense probe application.

The first ten probes were successfully completed in April 2002.

Today, laser welding of sensors is still the method used and GadCap have produced over 300 separate designs.   Whilst the principle of CapaciSense sensors remains the same, much development has occurred over the years with sensors becoming smaller and more complex in design to suit client needs.   Verification testing has also evolved to include environmental, vibration, thermal and calibration testing.

Contact GadCap for all of your blade tip clearance and blade tip timing requirements.