If you are searching for tip clearance or tip timing (NSMS) electronics or probes which you have previously purchased then below is a catalogue of standard part codes. Please contact us for more details.
Probes start their reference with: TVND-AD
Electronics start their references usually with: TVI-FE
| TVI-FE477OSC | Standard 2 MHz (5MHz to order) Auto Tuning Capacitance Probe Oscillator |
| TVI-FE435DC | FM Demodulator Calibrator Portable Instrument for calibrating FM Demodulators |
| TVI-FE440MS | Mains switch & Indicator Modules |
| TVI-FE446SCM | Signal Conditioning Module contains 1/X and Min, Max, Mean |
| TVI-FE446LIN | Lineariser Card for Signal Conditioning Module con |
| TVI-FE446SCML | Signal Conditioning Module contains 1/X and Min, Max, Mean Fitted with TVI-FE-446-LIN |
| TVI-FE447CDT | FM Demodulator; Standard 2 MHz (5MHz to order) with RMS, Blade Passing & Staircase outputs |
| TVI-FEMB5 | Blank front panel to replace module |
| TVI-FERC1 | Rack Connect cable 1m 25W D / 25W D |
| TVI-FERC2 | Rack Connect cable 2m 50W IDC / 50W IDC |
| TVI-FE448RA | 8 slot 3U 19” rack wired for 1x TVI-FE-440-MS & 8x TVI-FE-447-CDT (or 8x TVI-FE-441-RXE), 48 I/O BNCs, 2 x AM PSU connectors, 1 off 25 way ‘D’ rack-rack output connector, 1 off 50 way IDC Data-Acquisition connector, filtered mains inlet & voltage selector. With fan cooling. |
| TVI-FE449RA | 8 slot 3U 19” rack wired for 1x TVI-FE-440-MS & 8x TVI-FE-446-SCM, 33 I/O BNCs, 1 off 25 way ‘D’ rack-rack input connector, 1 off 50 way IDC Data-Acquisition connector filtered mains inlet & voltage selector. |
| TVI-FE450RA | 4 slot 3U half rack wired for 1x TVI-FE-447-CDT (or 1x TVI-FE-441-RXE) & 1x TVI-FE-446-SCM, 11 I/O BNCs, AM PSU connector, rear panel mains switch / indicator, filtered mains inlet & voltage selector. |
| TVI-FE450RA2 | 4 slot 3U half rack wired for 2x TVI-FE-447-CDT (or 2x TVI-FE-441-RXE) & 2x TVI-FE-446-SCM, 21 i/p & o/p BNCs, AM PSU connector, rear panel mains switch / indicator, filtered mains inlet & voltage selector. |
| TVI-FE451RA | 8 slot 3U 19” rack wired for 1x TVI-FE-440-MS , 4x TVI-FE-447-CDT (or 4x TVI-FE-441-RXE) & 4x TVI-FE-446-SCM, 41 i/p & o/p BNCs, 1 off 50 way IDC Data-Acquisition connector, AM PSU connector, filtered mains inlet & voltage selector. With fan cooling. |
| TVI-FE452RA | 4 slot 3U half rack wired for 4x TVI-FE-447-CDT (or 4x TVI-FE-441-RXE) , 24 i/p & o/p BNCs, AM PSU connector, rear panel mains switch / indicator, filtered mains inlet & voltage selector. |
| TVI-FE486OCFM4 | 4 channel oscillator carrier box standard. |
| TVI-FE496OCFM4 | 4 channel oscillator carrier box IS version. |
| TVI-FE486OCAM4 | 4 channel engine mounted oscillator and amplifier in IP65 enclosure |
| TVI-FE486OCAM3 | 3 channel engine mounted oscillator and amplifier in IP65 enclosure |
| TVI-FE486OCAM2 | 2 channel engine mounted oscillator and amplifier in IP65 enclosure |
| TVI-FE486OCAM1 | 1 channel engine mounted oscillator and amplifier in IP65 enclosure |
| TVI-FEPCxCDT | Power cable, connects power supply to TVI-FE486OCAM (x = length in ft) |
| x = 50 | |
| x = 100 | |
| x = 150 | |
| TVI-FESCxCDT | Signal cable, BNC-BNC for TVI-FE486OCAM (x = length in ft) |
| x = 50 | |
| x = 100 | |
| x = 150 | |
| TVI-FE441RXE | Single channel receiver for the FE-486-OCAM, with 1/X block for capacitance and distance outputs with built in AM PSU and digital display, operates in FE-4xx racks. |
| TVI-FE477OSC-RETUNE | Oscillator Retune |
| TVI-CAL | Probe Calibration |
| TVTND-REPAIR | Probe Repair |
| TVI-FE447CDT-RT | Standard Demodulator repair and recalibration |
| TVI-FE446SCM-RT | Standard Sig-Con repair and recalibration |
| TVI-FE448RA-RT | Rack test |
| TVI-Flex1 | Standard 1m Flex extension |
| TVI-Flex2 | Standard 2m Flex extension |
| TVI-Flex3 | Standard 3m Flex extension |
| TVI-Flex4 | Standard 4m Flex extension |
| TVI-Flex5 | Standard 5m Flex extension |
| TVI-Flex5.5 | Standard 5.5m Flex extension |
| TVI-Flex6 | Standard 6m Flex extension |
| 5 Series | |
| TVI-FE557CDT | 5 Series Demodulator |
| TVI-FE500CPM | 4 Channel Control and Processing Module including Clearance Software |
| TVZ-SW002 | 4 Channel Simple vibration software update |
| TVI-FE577OSC | 5 Series Oscillator |
| TVI-FE551RA | 5 Series Full Rack to take 12 demods |
| TVI-FE552RA | 5 Series Half Rack to take 6 demods |
| TVI-FE553RA | 5 Series Full Rack to take 12 demods with serial comms, alarm outputs and OPR i/p |
| TVI-FE554RA | 5 Series Half Rack to take 6 demods with serial comms, alarm outputs and OPR i/p |
| TVI-FE577-FE447 | Attenuator to allow a 447CDT demodulator to work with a 577OSC oscillator |
| TVZ-ENC058 | Single blanking plate for 5 Series Rack |
| TVZ-ENC059 | Double blanking plate for 5 Series Rack |
| TVI-FE496OCFM-RETRO | TVI-FE496OCFM Retrofit kit for 5 Series |
| TVI-FE577OSC-RETUNE | Oscillator Retune |
| G4P |
GadCap Technical Solutions will be very glad to welcome you at the 16th EUROTURBO Conference that will be held from […]
Read more
